1890 Scraper

Install Instructions

1. Hold bracket with tabs down and pointing away.
2. Place scraper on bracket tabs with the carbide edge down and away.
3. Install 3/8 x 1 1/2” bolt thru hole at the top of scraper and bracket with the bolt head on the bracket side.
4. Install washer and lock nut on bolt
5. Remove depth wheel on the opener.
6. Slide scraper bracket onto depth wheel arm with the scraper down and toward opener blades.
7. Locate large hole in bracket and center it on threaded hole in the depth wheel arm.
8. Re-Install spacers and depth wheel with bolt.