
Subject: SDX Drill Disk Scrapers
"This spring Air Design sent a new set of scrapers to put on my drill. We have very heavy soil that sticks to disks very easy. Last year we fought this problem alot and at the end of the season had several parts off of the drill damaged that was turned into warranty. This year the conditions were worse. But with the scrapers on we never had one disk build up with mud or any damage resulting in no warranty claims to CaseIH. They worked excellent and were easy to install, the blade showed little wear. We put 2800 acres on them this spring. Equally impressive as how they preformed was the experience of working with Air Design on this. They had little time design this scraper before we needed them, yet made sure that a quality scraper was delivered. I don't know how you could improve this scraper. It works and should be made as a option on the SDX Drill."
Larry Johnson - owner of 3 SDX drills
"We were very satisfied with the Air Design scrapers we used on our
1750 John Deere planter. The scrapers went through one season with very
little wear and remained in place throughout the season. We found the
Air Design scrapers to be superior to the OEM scrapers."
Bruce Freitag
Freitag Farms, Inc.
"Put Air Design scrapers on & throw the old scrapers away. Worked
excellent!"
JD No-Till planter
Randy Zimmerman
Walthill, NE
"Best scrapers they have ever used!"
JD 1770
Danny (Poinsett Colony)
Estelline, SD
"After we used Air Design scrapers all problems were eliminated. We
plant in many soil situations and various moisture conditions and have
tested them thoroughly. Wouldn't be without them!"
JD 1720
John Rear
Benson, MN
"Just a note to let you know I have traded planters again, and would not get a
new planter without your scrapers. (This is the 3rd one with your scrapers.)
After the mud I planted in this spring and your scrapers worked great, I knew I
would never be satisfied with OE scrapers. Thanks again,
White 5100 Series
Jim Keiper
Palo, IA
"Once you use the Air Design scraper you will never need another
scraper."
JD 7000 - JD 7300Vac
2600 Kinze - ASF CaseIH
Kevin Kimberly
Maxwell, IA
"Hands down, best scrapers ever on the market. They are excellent!"
JD 1770 NT
Wade Lenz
Hartley, TX
"Have been very happy with the Air Design scrapers used in strip
till conditions for two years with excellent wearability. They were
also easy to install to replace the original scrapers."
JD 1750
Jon Stock
St Charles, MN
"I was very satisfied with the performance of the Air Design planter
scrapers. I would not want to own a planter without them!"
CaseIH 955
Warren Brady
Albert, KS
"We planted 10,000 acres of corn in very wet conditions with Air Design
scrapers. We were very satisfied!"
JD 1780
Rod Walter
Huron, SD
"Been No-Tilling for eleven years and been frustrated with
standard rotary scrapers in wet Springs. After reading an article about
Air Design scrapers, I purchased two rows for comparision two years
ago. I was impressed and returned to buy enough for the entire
planter...They performed beyond my wildest dreams. I would highly
recommend them to any farmer who has been frustrated by the rotary
design as you do truly install them and forget about performance issues
forever."
JD 7200
Jim Andrew
Jefferson, IA
"Never had to unplug our JD 7300 planter. There was no down time. We
were completely satisfied and Amazed!"
JD 7300
Vincent Neuhaus
(The Black Lands of Texas) Waco, TX
"Very thankful for the Air Design scrapers. Anybody who has ever had to
clean out mud from their planters or drills will appreciate these
planter and disk drill scrapers!"
JD 1760
Ron Nelson
Greenfield, IA
"In severely wet planting conditions, Air Design scrapers were low
maintenance & outperformed standard planter scrapers. Hands down
there was no comparison!"
Kinze 3600 Twin Line
Todd Dybdahl
Clinton, MN
"The Air Design scrapers are the 'Cats Meow'! I planted 2000 acres of
corn, milo and sunflowers in wet, sticky clay soil. I would highly
recommend them to anyone."
JD 7300
Bruce Howard
Ulysses, KS

Paul Hartness- Sales Dept-Titan Machinery Fargo, ND. with Larry Johnson a Fargo area producer